Skip to main content

Orifice Plates Series MEGL

Orifice Plate Series for Clamp Connection MEGL

orifice assembly clamp connection

Manufactured by  emco controls

EMCO Orifice Plate Clamp Connection MEGL series are used as primary elements in flow measurement of liquid, gas and steam according to the differential pressure principle.

Design and calculation standards :

  • ISO 5167, ASME MFC-3M, Shell Flow Meter Engineering Handbook, AGA no. 3
  • Sizes : 2" - 24"
  • Pressure rating : 300 - 2500 lbs RF
  • Plate thickness : 3 - 16 mm depending on plate size.
  • Bore (d) : d > 12,5 mm
  • β (d/D) : 0,2 < β < 0,75
  • Material : AISI 316, 22Cr. Duplex, 25Cr.Duplex, 6Mo and others on request.
  • Vent or drain hole : On request.
  • Mounting style : Clamped between hubs.
  • Pressure taps : Threaded: 1⁄2" NPT int. (standard) or 1⁄2" BSP. Flanged: 1⁄2" and 3⁄4", 1500 and 2500 lbs RTJ.
  • Tap location : At least 15° apart, depending on size and pressure rating.
  • Tapping style : Corner or flange tappings.
  • Handle : With name plate in AISI 316 with the following inscription : TAG no., serial no., pressure rating, inner pipe diameter., bore, material.

Technical Data

  • Accuracy : +/- 0,6 % for β < 0,6 and equal to β for β values above 0,6.
  • Pressure loss : Depending on β, for β equal to 0,6 : ca. 60 % of the differential pressure measured.
  • Limits for : Re > 1260 x β2 D according to ISO 5167, Reynolds No 2000 < Re < 108 according to ASME MFC-3M
  • Length : Depending on hub size.

orifice assembly clamp connection ga

Sizes

DIN Flanges

  Schedule / Hub Size Corner tap. Flange tap.
Size wall thick.   Total length Total length
2" 80 2GR20 140 mm 190 mm
  160 2GR16    
  XXS 2GR14    
  12,5 mm 2GR14    
  14,2 mm 2GR14    
3" 80 3GR27 140 mm 190 mm
  160 3GR25    
  XXS 3GR23    
  16 mm 3GR23    
  17,5 mm 3GR23    
4" 80 4GR40 150 mm 200 mm
  120 4GR34    
  160 4GR34    
  XXS 4GR31    
  20 mm 4GR27    
  22,2 mm 4GR27    
6" 40 6GR62 190 mm 240 mm
  80 6GR62    
  120 6GR56    
  160 6GR52    
  25 mm 6GR46    
  28 mm 6Gr46    
8" 60 8GR82 200 mm 250 mm
  100 8GR76    
  120 8GR72    
  140 8GR72    
  160 8GR67    
  25 mm 8GR67    
  25 mm 8GR72    
  28 mm 8GR72    
10” 100 10H94 210 mm 260 mm
  120 10H94    
  140 10H94    
  160 10H84    
  30 mm 10H84    
12” 60 12M120 240 mm 290 mm
  100 12M112    
  120 12M106    
  140 12M106    
  160 12M102    
  36 mm 12M102    
  45 mm 12M94    
  50 mm 12M87    
14” 60 P130 270 mm 320 mm
  100 P130    
  120 P120    
  140 P120    
  160 P112    
  55 mm X14GR97    
  65 mm P94    
16" 60 S152 300 mm 350 mm
  100 S140    
  120 S137    
  140 S137    
  160 S130    
  50 mm S120    
  55 mm S120    
  65 mm S112    
18" 60 U170 300 mm 350 mm
  100 U160    
  120 U152    
  160 U144    
  55 mm U140    
  60 mm S134    
20” 60 3V192 320 mm 370 mm
  100 3V180    
  120 3V170    
  160 3V170    
  65 mm 3V152    
24” 60 3Y220 350 mm 400 mm
  100 3Y210    
  120 3Y210    
  160 3Y200    

Works with:-

Differential pressure transmitters:-IDP10; IDP15; IDP25; IDP31; IDP50
And all our Absolute Pressure and Gauge Pressure transmitters, Temperature sensors and mass flow computers.
MultiVariable Transmitters :- IMV25, IMV30

 
Download Manual (Not Available)

If you require further information on this product or would like a quotation, please contact dp-flow on:

email: sales@dp-flow.co.uk
sales +44(0)1608 544222

Supplied by DP-Flow