Orifice Plates Series ISB/1

Orifice Plates ISB/1

Manufactured by  

The EMCO Orifice Plate Series for insertion between orifice flanges according to ANSI B 16.36 with RF or RTJ facing.
Material in stainless steel as standard, others on request.
The plates are calculated according to ISO 5167, ASME MFC-3M or other international standards.

Principle

EMCO orifice plates are used as primary elements in flow measurement of liquid, gas and steam according to the differential pressure principle.

Construction

• Design and calculation standards : ISO 5167, ASME MFC-3M, ISA RP 3.2, Shell Flow Meter Engineering
• Handbook, L. K. Spink, AGA no. 3
• Sizes : 1" - 24" according to ANSI B 16.36, 50 mm < D < 1000 mm according to ISO 5167 and 50 mm < D < 900 mm according to ASME MFC-3M.
• Pressure rating : 300 - 2500 lbs RF
• Plate thickness : 3 - 16 mm depending on plate size
• Bore (d) : d > 12,5 mm
• β (d/D) : 0,2 < β < 0,75
• Material : AISI 316, Monel, 6Mo and others on request
• Vent or drain : On request hole
•  
• Mounting style : Between raised face flanges according. To ANSI B16.36 or DIN 19214, other standards on request.
• Orifice plate shapes : Square edge concentric, square edge eccentric, conical, 1/4 circle, segment.
• Handle : With name plate in AISI 316 with the following inscription : TAG no., serial no., pressure rating, inner pipe diameter., bore, material.

Technical Data

• Accuracy : + /- 0,6 % for β < 0,6 and equal to β for β values above 0,6
• Pressure loss : Depending on β, for β equal to 0,6 : ca. 60 % of the differential pressure measured
• Limits for : Re > 1260 x β2 D according to ISO 5167
• Reynolds No 2000 < Re < 108 according to ASME MFC-3M

Works with:-

Differential pressure transmitters:-IDP10; IDP15; IDP25; IDP31; IDP50
And all our Absolute Pressure and Gauge Pressure transmitters, Temperature sensors and mass flow computers.
MultiVariable Transmitters :- IMV25, IMV30

Supplied by DP-Flow