Skip to main content

Orifice Plate MEF

Orifice Plate with Single Pressure Tapping Series MEF

orifice mef

Manufactured by  emco controls

The EMCO Orifice Plate with Single Pressure Tapping Series MEF for Insertion Between Flanges
Principle
EMCO orifice plate are used as primary elements in flow measurement of liquid, gas and steam according to the differential pressure principle. The MEF series are manufactured as a one piece orifice plate orifice carrier assembly with integral corner tapings for installation between flanges as described and specified below.

Construction

  • Design and calculation Standards : ISO 5167, ASME MFC-3M, DIN 19205, Shell Flow Meter Engineering Handbook, L. K. Spink, AGA no. 3
  • Sizes : DN 50 - 1200, 2" - 42"
  • Pressure rating : PN 10 - 400, 150 - 2500 lbs
  • Plate thickness : 8 mm
  • Vent or drain hole : On request
  • Material : Carbon steel P265GH, AISI 316, 16Mo3, 13CrMo4-5, other materials on request.
  • Pressure taps : 3/8", 1/2" BSP male, Ø 12 mm, 1/2" NPT
  • Tap lengths : 150 mm, others on request.
  • Tap location : At least 45 degrees apart. To be stated with order
  • Marking : The orifice plate is marked with "+" and"-" and flow direction.

Mounting style :

Between flanges with flat or raised face or groove according to DIN 2526, 2513, 2512, or RF according to B 6.5
Orifice plate shapes : Square edge concentric, square edge eccentric, conical, 1/4 circle, segment. The plate is bevelled on the down stream side except for 1/4 circle orifice plate.

orifice plate shapes

Technical Data

  • Accuracy : /- 0,6 % for β < 0,6 and equal to β for β values above 0,6
  • Pressure loss : Depending on β, for β equal to 0,6 : ca. 60 % of the differential pressure measured
  • Limits for : Re > 1260 x β2 D according to ISO 5167, Reynolds No 2000 < Re < 108 according to ASME MFC-3M

Accessories : Shut-off valves and condensing chambers for steam flow measurement. Flange assembly complete with bolts, nuts and gaskets.

Sizes

DIN Flanges

Size Pipe PN 10   PN 16   PN 25   PN 40   PN 64   PN 100   d1=
DN OD D  d4 D d4 D d4 D d4 D d4 D d4 D+
50 60.3 54.5 107 54.5 107 54.5 107 54.5 107 54.5 113 53.9 119 1
65 76.1 70.3 127 70.3 127 70.3 127 70.3 127 69.7 138 68.9 144 1
80 88.9 82.5 142 82.5 142 82.5 142 82.5 142 81.7 148 80.9 154 1
100 114.3 107.1 162 107.1 162 107.1 168 107.1 168 106.3 174 104.3 180 1
125 133 125 192 125 192 125 194 125 194 124 210 120.4 217 2
125 139.7 131.7 192 131.7 192 131.7 194 131.7 194 130.7 210 127.1 217 2
150 159 150 218 150 218 150 224 150 224 147.8 247 144.8 257 2
150 168.3 159.3 218 159.3 218 159.3 224 159.3 224 157.1 247 154.1 257 2
175 193.7     182.9 248 182.5 254 182.5 265 181.1 277 176.1 287 2
200 219.1 207.3 273 207.3 273 206.5 284 206.5 290 204.9 309 199.1 324 2
250 273 260.4 328 260.4 329 258.8 340 258.8 352 255.4 364 248 391 2
300 323.9 309.7 378 309.7 384 307.9 400 307.9 417 301.9 424 295.5 458 2
350 355.6 341.4 438 339.6 444 339.6 457 338 474 330.6 486 323.6 512 2
350 368 353.8 438 353.8 444 352 457 350.4 474 343 486 336 512 2
400 406.4 392.2 489 390.4 495 388.8 514 384.4 546 378 543     2
400 419 404.8 489 403 495 401.4 514 397 546 390.6 543     2
500 508 493.8 594 492.9 617 488 624 479.6 628         4
600 610 595.8 695 592.4 734 588 731             4
700 711 695 810 693.4 804 686 833             4
800 813 797 917 793 911 784.6 942             4
900 914 896 1017 894 1011 882 1042             4

Overall Dimensions

mef ga

All dimensions in mm
D : Inner pipe diameter
d4 : Outer diameter of carrier rings when mounted between flanges with facing according to DIN 2526.
d1 : Inner diameter plate holder. When mounted between flanges with facing according to DIN 2512 and 2513, the inner diameter is D + 1.2 mm.

 

 

 

 

Works with:-

Differential pressure transmitters:-IDP10; IDP15; IDP25; IDP31; IDP50
And all our Absolute Pressure and Gauge Pressure transmitters, Temperature sensors and mass flow computers.
MultiVariable Transmitters :- IMV25, IMV30

 
 
Download Manual (Not Available)

If you require further information on this product or would like a quotation, please contact dp-flow on:

email: sales@dp-flow.co.uk
sales +44(0)1608 544222

Supplied by DP-Flow