Skip to main content

EMCO Conductivity Analyzer type 560

EMCO Conductivity Analyzer Type 560



The EMCO Conductivity Analyzer type 560 is designed to precisely monitor water and process fluids, ranging from ultra pure water (UPW) to with weak acids or bases in the process industry.


The Analyzer is extremely easy to use due to the simple and user friendly menu structure with menus in clear text for easy configuration. Just select the appropriate compensation curve ranging from UPW to NaOH.
The EMCO Conductivity Analyzer is very suitable for harsh environment in the process industry due to the stainless steel enclosure and IP65 protection class in combination with hinged cover.

The Analyzer can be mounted in a panel (panel opening 138 x 138 mm) on a wall (with bracket) or on a 2” pipe.
The Analyzer can be supplied with hinged look through cover.


The EMCO Conductivity Analyzer and the 4 electrode sensor series 600 with internal electrodes for smaller pipe sizes or with external electrodes for larger pipe sizes or vessels are extremely resistant to scale build-up, due to their design.
The analyzer offers high sample rate and an internal damping lowers the spikes.
Trend curve on output signal with selectable time period up to 8 hours for easy check. The display is light blue, but turns red in case of analyzer/sensor failure. Galvanic isolated protective & measurement ground for elimination of ground loop noise. Memory back up for all parameters.
Loop powered version is available, but without display back light. All vital functions are pass word protectable Low power consumption, max. 4 VA User friendly menu with number identified menu programs programmable in clear text. Easy understandable icons, which reports the successful run of the process and alarm points. An external temperature sensor can be connected.


Various recipes for common fluids are available


Temperature limits operation: -25 to +65ºC
Storage: -40 to +80ºC
HUmidity: max. 80 Rh, non condensing


Instruction manual

Quality Assurance

EMCO Controls is certified according to : ISO 9001- 2008,
Pressure Equipment Directive PED Module H,
Welding quality certificate to EN 3834-2

Material, enclosure aluminium, AISI 316L housing
Analog signal dual 4-20mA, user programmable, galvanic isolated
Alarm dual relays, 230Vac 6Amp, change over, galvanic isolated 
Communication  Profibus PA
HART communication protocol
Foundation Fieldbus is pending 
Measuring range  0,05 μS/cm – 1500 mS/cm, full auto range 
Temperature range  -35°C - +240°C, Pt1000 or Pt100 
Display  Backlit dot matrix (LCD) (line powered) 
Dimensions  144 x144 mm mounting, for panel, wall & pipe 
Line powered 65-265 Vac or 9-36 V DC 
Loop powered  2 wire (no alarms, no display light is available) 
Sensor connection  9 pole terminal connection 
Built in recipes  most common weak acids, bases, ultrapure water (UPW) and salt solutions 
Direct access to  Trend, diagnostic, setup menu 
Protection IP65 
EMC/EMI  to EN61326
Type of sensors 4 electrode and 2 electrode 
Limits of cell constant  0,01 – 1,0 
Damping  internally averaging 5 cycles 
Lightening Suppression  surge protection on all I/O´s and power lines 
Hazardous area  ATEX Eex ia IIC T6, pending (only loop powered) 
SIL 2 approval  under preperation 

Mounting Options