Compaq Flow Meter Run with Transmitter Flanges for Compact Mounting

compact meter run assembly

The EMCO CompaQ flow meter measures most liquids and gasses.

Benefits

  • Sizes ranging from DN 10 (3/8") up to DN 100 (4").
  • Standardised product based on well proven and widely accepted technology.
  • No moving parts.
  • Not sensitive to vibrations.
  • Compact design.
  • Easy to install.
  • High accuracy.

Typical Applications

EMCO Meter Run type CompaQ is used as primary element in flow measurement of liquid, gas and steam according to the differential pressure principle. The differential pressure transmitter and 3 way manifold valve is mounted directly on the CompaQ ensuring a fast and safer installation on site.

Construction

  • Design and calculation standards : ISO 5167, BS 1042, ASME Fluid Meters, DIN 19205,Shell Flow Meter Engineering Handbook,
  • Sizes : DN 10 – DN 100, 3/8" - 4".
  • Pressure rating : PN 10 - 400, 150 - 2500 lbs
  • Plate thickness : 3 mm.
  • Vent or drain hole : On request.
  • Material : AISI 316, other on request.
  • Pipe run : Can be honed for increased accuracy.
  • Pressure taps : Transmitter flanges with a 54 mm centre distance.
  • Connection : Flanges with flat or raised face or groove according to DIN 2526, 2513 or 2512, or RF and RTJ according to ANSI B 16.5
  • Orifice plate shapes : Square edge concentric, square edge eccentric, conical, 1/4 circle, segment. Orifice plates are bevelled on the down stream side except for 1/4 circle orifice plate.
  • Marking : The carrier rings are marked with "+" and "-" and flow direction.
  • Technical Data
  • Accuracy : +/- 0,5 - 1 %
  • Pressure loss : Depending on β, for β equal to 0,6 : ca. 60 % of the differential pressure measured
  • Limits for : Re > 1260 x β2 D according to ISO 5167
  • Reynolds No 2000 < Re < 108 according to ASME MFC-3M

orifice plate shapes

Sizes

General Overall Length

DN Inch Total Length
10 3/8" 400
15 1/2" 550
20 3/4" 700
25 1" 900
32 1 1/4" 100
40 1 1/2" 1300
50 2" 1500
65 2 1/2" 1600
80 3" 1800
100 4" 2200

Works with:-

Differential pressure transmitters:-IDP10; IDP15; IDP25; IDP31; IDP50
And all our Absolute Pressure and Gauge Pressure transmitters, Temperature sensors and mass flow computers.
MultiVariable Transmitters :- IMV25, IMV30

Download Manual (Not Available)

If you require further information on this product or would like a quotation, please contact dp-flow on:

email:
sales +44(0)1865 600245